Gear Head, Bed Type Thread Cutting Machines
IN INCHES
1/4” to 1” & 3/8” to 1.1/2” Cap Bolts & Pipes
IN MM
12 mm to 65 mm , 6 mm to 39 mm Cap Bolts & Pipes
Bed Type Thread Cutting MachinesVideo
Bed Type Pipe & Bolt Threading Machine:
General Specification :
The Bolt Threading Machine is used for Cutting External Thread on Bolts by Chasing method. HSS Tangential Chasers are used as cutters. Bolt remains stationery and Die Head rotates. Matric, BSP, BSPT, NPT, UNF,UNC, BSW, Acme Threads, B.S.F etc. threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-
• Base • Head Stock • Saddle • Bed Type Clamping Vice • Die Head.
DESIGN & WORKMANSHIP: The National Cutting Tool thread cutting machines are designed to produce quality threads within the to lerance for which they were intended.
HEAD STOCK: A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. Range of NCT Threading machines and Die Heads.
1/4'' to 1'' Capacity Pipe & Bolt
3/8'' to 1.12'' do/-
Model Super Deluxe
1/4'' To 1"
3/8'' To 1 .1/2"
Saddle Movement
10'' to 12''
7''
SpindleSpeedRange
60-90
60-90
Number of Spindle Speed
2 or 3
3
Threading Capacity
1/4'' to 1''
3/8'' to 1.1/2''
Production per Hour
60 to 80
60 to 80
H.P. Required
3 H.P. 960 RPM
3 H.P. 960 RPM
Lead Screw
As per demand
As per demand
Space Required
24'' x 65''
24'' x 65''
Weight
500 Kg
550 Kg
Note : Above specifications may change without notice towards the improvements in products.
Threading Tangential Chaser:
NCT Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.
NCT Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set. Read More
