NCT BRAND

Square Threading Machine Pillar Type
With Lead Screw , For Scaffolding Pipes

20 mm OD to 65 mm OD Length of Threading 400 mm

General Specification :

The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates.Matric, BSP, BSPT, NPT, UNF,UNC, BSW, Acme Threads, B.S.F etc. threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-
Base, Head Stock, Saddle, Pillar Type Or Bed Type Clamping Vice, Die Head.

THE PIPE THREADING MACHINES are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirement are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.

DESIGN & WORKMANSHIP: The National Cutting Tool thread cutting machines are designed to produce quality threads within the to lerance for which they were intended.

HEAD STOCK: A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.

THE BED: The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.

THE SADDLE: The Saddle is fitted on two pillers very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.

The APRON: The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.

VICE JAWS: The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.

Model Super Deluxe	⅜” To 1.1/2	1/2” –2.1/2”	1” to 4”&	2.1/2” to 6”	4” to 8”
Saddle Movement	Upto 15”	Upto 27”	Upto 20”	Upto 15”	Upto 15”
Spindle Speed Range	32-54	54-85	28-48	28-48	28-48
Number of Spindle Speed	2	2	2	2	2
Threading Capacity	⅜” –1.1/2”	1/2” –2.1/2”	1" to 4" &	2.1/2" to 6"	4" to 8"
Production per Hour	60 to 80	45 to 80	35 to 40	35 to 40	35 to 40
H.P. Required	3 H.P.960 RPM	7.5 H.P.960 RPM	12.5 H.P.960 RPM	12.5 H.P.960 RPM	12.5 H.P.960 RPM
Lead Screw	Provided	Provided	Provided	Provided	Provided
Space Required	24” x 65”	42” x 65”	60” x 96”	60” x 96”	60” x 96”
Weight (KG)	550	990	1600	1900	2300

Note : Above specifications may change without notice towards the improvements in products.